Aeroseal Duct Sealing Solution

Aeroseal Duct Sealing is a patented breakthrough technology that tackles leaks from the inside out. Aeroseal software allows the technician to accurately measure the duct leakage in residential homes and commercial buildings. The Aeroseal process puts escaping air under pressure and causes polymer particles to stick first to the edges of a leak, then to each other until the leak is closed.

The technology was developed within the Indoor Environment Program at Lawrence Berkeley National Laboratory, whose IAQ scientists tested it. The research was funded by US Environmental protection agency, US dept. of Energy, Electric Power Research Institute and California Institute of Energy and Environment.

The University of California was granted initial patents in 1996 and 1999, and Aeroseal holds an exclusive license to the technology.

The Aeroseal 6-step process takes very little time to bring you big savings and comfort:

• Wall registers are covered in order for air to escape only through the leaks
• Sealant in injected into the ducts for approximately 1 hour
• Small aerosol particles are kept suspended in the airflow by continuous air movement
• As the air stream makes a sharp turn to exit through a leak, the particles collide with and adhere to the leak edges
• Ducts are sealed with only 1-2 oz. of the sealant material remaining in the ducts
• A computer-generated analysis summarizing your home’s or building’s amount of leakage is generated, providing verification of success of the process