Fire Stop Systems, LLC. is a fireproofing company providing specialized installation of fireproofing materials. The company was established in 1987 in Naples, Florida with offices in Orlando and Miami, Florida. Although the home office remains in Naples, Fire Stop Systems, LLC. performs work throughout the State of Florida as well as surrounding states in the Southeast.
Fire Stop Systems, LLC. employs a professional staff, recognized throughout the industry for its exemplary service, technical expertise and professionalism. The company has enjoyed an excellent reputation throughout the industry. We hope that you will take the time to explore the services and capabilities offered by Fire Stop Systems.
Fire Stop Systems, LLC. staff possess a wide-range of skills and experience, from the estimating professionals and office staff to the specialized field personnel. For each project, needs are determined based on the architect’s specifications, past experiences, and the customer’s budget. FSS uses its trained personnel and technologies to fulfill the requirements of any project, large or small. FSS makes every attempt to provide the best service and product at the best price, often using value engineering, whenever possible.
Our Mission: To provide the most efficient service possible, giving the utmost care to the professional installation of quality fireproofing products including spray thermal/acoustical insulations, architectural expansion joint barrier and covers, perimeter/glass curtain wall fire-safing and penetration fire barrier.
Restrained vs Non-Restrained
SUBJECT: UL and ICC Restrained Beam Rating Requirements
Recently there has been numerous inquiries as to the correct use of the of Restrained
Beam ratings in accordance with International Building Code (IBC) and Underwriters
Laboratories, Inc. (UL) guidelines.
In order to determine if your building construction is restrained, Section 703.2.3
restrained classification in the 2006 International Building Code indicates the following:
“Fire-resistance-rated assemblies tested under ASTM E 119 shall not be
Factory-mixed, dry formulation of gypsum or portland cement binders, additives, and lightweight mineral or synthetic aggregates mixed with water at Project site to form a slurry or mortar for conveyance and application.
For additional information about our location, see Contact Us.