Flag World Company

Owner:

Khaled Hamideh

Architect:

Flag World Company

General Contractor:

Flag World Company

Client:

Greg Palmer - President

(303) 757-5661

Bell Home Solutions

Scope Of Work

To install a 25' Aluminum Internal Halyard Standard Flagpoles with a Ground Set and  2 flags to fly on the pole. The specs for the flagpoles are as follows:

Material: Alloy 6063-T6 aluminum tubing with uniform conical taper.

Finish: Directional sanded satin ground or choose from six other powder coat paint or anodized finishes.

Truck: Single or double revolving with stainless steel bearing concealed inside a cylindrical hood.

Halyard: Stainless steel aircraft cable with two, chrome Plated, bronze swivel snap hooks, plastic covered counterweight and beaded sling.

Collar: Spun aluminum flash collar finished to match pole.

Foundation: Ground Set foundation — sleeve fabricated from 16-gauge galvanized corrugated steel tube with a 3/16-inch thick steel base plate and support plate, 3/4-inch diameter x 18 inches long ground spike and steel centering wedges.

Select one of the following as a standard option
Winch: A winch is provided inside the pole at 4′-6″ above ground level to raise and lower the flag by use of a removable hand crank. The winch contains an automatic brake system to permit locking of the flag in any position.

Cam Cleat: Manually operated cam cleat includes a flush-access door with cylinder lock and continuous piano hinge
Outrigger