Dennis Reeves, Inc.
La Verne, CA 91750
Featured Project Return to Projects List
Life Technologies Lobby
Project Information
- Project Location:
- Carlsbad, CA
- Status:
- Completed
- Structure Type:
- Animal Hospital / Kennel
References
- Owner:
- Not Provided
- Architect:
- Not Provided
- General Contractor:
- JR Construction
Scope Of Work
This project is the main lobby at Life Technologies corporate headquarters. The millwork package consists of a reception desk, paneled niche wall, 12” tall base throughout the room, an 8’ x 10’ decorative wall piece and ceiling trellis system.
The trellis system hangs from the 25’ ceiling. It consists of 15 – ½” x 4’ x 4’ laminated panels attached to the ceiling joists using 1” standoffs at each corner. The hanging part of the trellis is 12” tall x 12’ wide x 20’ long, laminated Wilsonart Wild Cherry. It is attached to the roof trusses using unistrut and all thread. It took 2 scissor lifts with 2 men in each lift and 1 ground man 2 days to install the unistrut structure to the roof trusses before the ceiling was framed. After the ceiling was dry walled and painted, it took 4 scissor lifts, with 2 men in each lift and 2 ground men 4 days to install the finished product.
The 8’ x 10’ decorative wall piece is laminated Wilsonart Wild Cherry with semi-recessed aluminum trim routed into the face of it. It took 2 scissor lifts, with 2 men in each lift and 2 ground men 1 day to install.
The 12” tall base and paneled niche wall are Wilsonart Wild Cherry. The reception desk is Wilsonart Wild Cherry with Nevamar Champagne Sagawood front panels on stand-offs. The desk top is granite, the upper top is also granite with ¾” thick glass on stand-offs.
The entire lobby took 640 man hours to produce in the shop and 750 man hours to install.