Cool-Roof Systems

SPRAY FOAM INSULATION

Commercial construction projects can present challenges to architects and contractors, some involving insulation, air sealing or sound dampening. These issues can be addressed with the use of Cool-Roof Systems polyurethane spray foam systems.

As our world gets more energy-conscious, one of the key phrases is "Building Envelope," which is the system of components that battles against movement of air, moisture and heat. As one of the most efficient insulation materials available, spray foam will provide excellent insulation in lesser thicknesses than other insulating materials. However, the R-value of the insulation system is no longer the sole factor in energy conservation. Air movement and moisture control must also be taken into consideration. Spray foam is expandable foam that will completely seal any gaps and crevices preventing air infiltration, moisture infiltration, as well as the intrusion of dirt and pollutants from the outdoors. In addition, large gaps and crevices are easily filled with Cool-Roof Systems spray foam. 
\r\nSpray foam can be used to seal HVAC penetrations through wall junctions.

Consider Cool-Roof spray foam for new construction and retrofit of commercial buildings - offices, universities, hotels, restaurants, shopping malls, retail outlets, warehouses, health care facilities, airports, sports centers.

COMMERCIAL SPRAY FOAM ROOFING

Cool-Roof Systems also offers High Energy Efficiency Spray-In-Place Foam Insulation for thermal and moisture control. Polyurethane Foam is the most efficient form of thermal insulation commercially available. The systems usually pay for themselves in 2 to 6 years through energy and maintenance savings. All our foams insulation, open cell and closed cell and Cool Roof/waterproofing systems are LEED qualified and are green building materials.

Our Cool Roof/ waterproofing systems Do Not contain harmful chemicals. They can usually be applied over existing roofing systems, providing an environmentally friendly solution that saves demolition and rebuilding costs. There is no known end to the service life of a properly maintained SPF insulated Cool Roof roofing system. Our solutions exceed current Title 24 requirements. 10, 15, and 20 year labor and material warranties are available for your peace of mind.

SPRAY FOAM ROOFING

Spray foam cool roof dramatic energy savings due to superior insulating efficiency

Stops leaks - Conforms to any shape or design feature

Weather resistant

Highest R-value per inch - Available from R7 to R49

Environmentally friendly

Adds structural strength - Increased wind resistance

Meets or exceeds building code requirements

Covers existing roof – tear-off usually not required. It adheres to most surfaces

Spray Foam Insulated Cool Roof, with acrylic and silicone coatings are the most proven, durable and energy saving roofing systems available today. Users enjoy dramatic energy savings with a seamless, waterproof surface that is virtually maintenance free with these important benefits listed below.

Cool-Roof Systems also offers High Energy Efficiency Spray-In-Place Foam Insulation for thermal and moisture control. Polyurethane Foam is the most efficient form of thermal insulation commercially available. The systems usually pay for themselves in 2 to 6 years through energy and maintenance savings.

COMMERCIAL SPRAY FOAM INSULATION

Commercial construction projects can present challenges to architects and contractors, some involving insulation, air sealing or sound dampening. These issues can be addressed with the use of Cool-Roof Systems polyurethane spray foam systems.

As our world gets more energy-conscious, one of the key phrases is "Building Envelope," which is the system of components that battles against movement of air, moisture and heat. As one of the most efficient insulation materials available, spray foam will provide excellent insulation in lesser thicknesses than other insulating materials. However, the R-value of the insulation system is no longer the sole factor in energy conservation. Air movement and moisture control must also be taken into consideration. Spray foam is expandable foam that will completely seal any gaps and crevices preventing air infiltration, moisture infiltration, as well as the intrusion of dirt and pollutants from the outdoors. In addition, large gaps and crevices are easily filled with Cool-Roof Systems spray foam. 
\r\nSpray foam can be used to seal HVAC penetrations through wall junctions.

Consider Cool-Roof spray foam for new construction and retrofit of commercial buildings - offices, universities, hotels, restaurants, shopping malls, retail outlets, warehouses, health care facilities, airports, sports centers.

We offer a variety services, including, but not limited to:

Roof Inspections

A roof inspection gives building managers and owners a quick and easy assessment of the roof conditions, a guide for needed maintenance and repairs to preserve or extend the life of the existing roofing system, and an important financial plan to help accurately prepare and time future roof replacement options… on budget and on your own schedule.

Leak Detection

Spray Foam stops leaks and is weather resistant. Polyurethane foams form monolithic, self-flashing surfaces which effectively seal against leaks. It can be sprayed with slopes to drains, facilitating water removal. Additional low spots can be filled to reduce ponding water. Reduces and simplifies roof maintenance.  The polyurethane foam systems usually require little or no maintenance. If damaged, caulking is sufficient for repair in most cases. Polyurethane is much easier to repair than most built up systems. Repairs, changes or modifications in equipment can easily be accomplished.

Routine Maintenance

Maintenance costs are usually the second largest single expense component for buildings… right behind utility costs. Most building owners forget to get the roof serviced until it is too late. Most of the time tenants or employees will wait until the roof leaks to schedule an inspection, this typically leaves limited and costly options. Roof replacement is never cheap and if the expense is unexpected the results can be devastating on an operating budget.

Roof Clean Up

Remove debris from the roof surface, inspect drains and waterways to allow the free-flow of water from the roof.

Roof Penetration Repair

Roof repair at penetrations, such as newly installed or changed out equipment (i.e. A/C units, solar stanchions, skylights, antennas, etc.).

METAL BUILDING FOAMING

Sprayed polyurethane foam is used in metal building construction and maintenance for air sealing, condensation control and general insulation. Many metal buildings have a corrugated surface. Sprayed insulation covers uneven surfaces efficiently because it molds to irregular shapes. Although large buildings may be more economically insulated by a commercial polyurethane foam contractor, disposable foam kits are often used to create a complete insulation system in small buildings. Seams are easily sealed using foam kits as well as floor/wall junctions where moisture intrusion is often an issue. Insulating the underside of a metal roof will control condensation and erosion.

Surface preparation involves the removal of all loose dirt and debris. In ideal conditions, the surface temperature will be between 65°F and 90°F for optimum yield.

Interior surfaces in inhabited buildings should be covered with a 15 minute thermal barrier for fire protection.

Cool-Roof Systems is an accredited Spray Polyurethane Foam Alliance (SPFA) accredited contractor and PCP (Professional Certification Program) certified.  We are the leading provider of Sprayed Polyurethane Foam (SPF) roofing, the most proven, durable and energy-saving roofing system available.  SPF is the roofing system of choice for flat to low-sloped roofs at major universities, museums, office and municipal buildings, industrial and retail complexes.

RESIDENTIAL SPRAY FOAM ROOFING

Spray foam cool roof dramatic energy savings due to superior insulating efficiency

Stops leaks - Conforms to any shape or design feature

Weather resistant

Highest R-value per inch - Available from R7 to R49

Environmentally friendly

Adds structural strength - Increased wind resistance

Meets or exceeds building code requirements

Covers existing roof – tear-off usually not required. It adheres to most surfaces

Spray Foam Insulated Cool Roof, with acrylic and silicone coatings are the most proven, durable and energy saving roofing systems available today. Users enjoy dramatic energy savings with a seamless, waterproof surface that is virtually maintenance free with these important benefits listed below.

Cool-Roof Systems also offers High Energy Efficiency Spray-In-Place Foam Insulation for thermal and moisture control. Polyurethane Foam is the most efficient form of thermal insulation commercially available. The systems usually pay for themselves in 2 to 6 years through energy and maintenance savings.

COMMERCIAL ROOFING

Cool-Roof Systems also offers High Energy Efficiency Spray-In-Place Foam Insulation for thermal and moisture control. Polyurethane Foam is the most efficient form of thermal insulation commercially available. The systems usually pay for themselves in 2 to 6 years through energy and maintenance savings. All our foams insulation, open cell and closed cell and Cool Roof/waterproofing systems are LEED qualified and are green building materials.

Our Cool Roof/ waterproofing systems Do Not contain harmful chemicals. They can usually be applied over existing roofing systems, providing an environmentally friendly solution that saves demolition and rebuilding costs. There is no known end to the service life of a properly maintained SPF insulated Cool Roof roofing system. Our solutions exceed current Title 24 requirements. 10, 15, and 20 year labor and material warranties are available for your peace of mind.