View all projects

Media Gallery

Hand Sawing Hand Sawing Concrete Sawing and Drilling
N. Flagler Bridge WPB N. Flagler Bridge WPB
Chain Sawing Chain Sawing
Dams & Levies Dams & Levies Jane Green Retention Dam
Arena / Stadium Arena / Stadium Hard Rock Stadium
Bridge Bridge Friendship Trail
View Media Gallery


Founded In: 1985
Annual Vol: $500,000 - $1 million

Our Story

Read More

Speedy Concrete Cutting is family owned and operated since 1988.  We offer high quality, cost effective selective demolition along with reliability, quality workmanship and advanced technology.  We've excelled by implementing proven technologies and innovating practical solutions to complete even the most demanding projects.  

With the largest fleet in the Southeast United States, Speedy Concrete Cutting provides the response and capabilities necessary to meet the demands of the fast paced construction industry.


Core Drilling:  Core Drilling is the most common of the services we offer, and is a fast and efficient means of creating round penetrations for plumbing, mechanical and general construction applications. What you may not know is that our company has large bit stock from 24” to six foot in diameter. We also carry a vast array of continental tubing that allows for almost limitless drilling depth. Speedy has successfully cored, and extracted, horizontal holes at 90’ in depth and vertical holes at 82’ deep.

Wire Sawing:  Wire sawing is an area in which Speedy truly differentiates itself from the competition. One of the cornerstone applications of our bridge demolition division, wire sawing is the preferred method for sawcutting very large, thick sections of concrete of limitless dimensions. Pictured here is one of the severs we performed through the seal slab of the Sister Creek bascule bridge in Jacksonville, FL. This sever was completed in 35’ of water and totals just over 420 square feet. We are currently operating nine wire saw units throughout the company.

Slab Sawing / Flat Sawing:  Slab or “flat” sawing is another common tool in our industry, being the preferred method for the saw cutting of large horizontal concrete slabs and structures. What separates our company is our large inventory and vast array of diesel, propane or electrically powered equipment. Our largest flat saw can spin a 92” diameter blade; making cuts at over 40” deep!

Chain Sawing:  The diamond chainsaw is a favorite of mechanical contractors, capable of creating cuts as small as 5” at 1/4” wide and with depths of up to 30”; making it ideal for Florida’s high-rise construction market. Again, what separates our company is size. Speedy Concrete Cutting is ICS Blount’s highest volume “pro-cutter” consumer of diamond chains and bars in the United States.

Hand Sawing:  Handsaws are hydraulic powered, light weight, and are the “workhorse” of any concrete sawing and drilling company. Hand sawing provides portability, speed and cutting depths to 12”.  Speedy Concrete Cutting’s handsaw are custom manufactured to our own specifications allowing for more accurate sawcuts and less operator fatigue. We currently have over 150 hydraulic handsaws on inventory.

Curb Sawing:  Curb sawing is also a key service in our bridge demolition division and is used to perform flush sawcutting of barrier walls leaving the bridge deck to remain undisturbed and intact.  This “rider” saw is capable of flush cutting up to 24” in depth and can saw more than 400 linear foot per day. Speedy currently operates four rider curb saws in the state.

Wall Sawing/Track Sawing:  Wall or "Track" Sawing is used for precision cuts through vertical surfaces up to 40” in depth.  Speedy’s latest investment to improve our capabilities and delivery is the purchase of five new “high-cycle” wall saw units which can run up to 86” diameter blades. They are lighter in weight, programmable and remotely operated. This equates to less operator fatigue and risk of injury, and faster production times. We currently operate 14 wall saw units companywide.

Breaking and Removal:   Being a full-service sawing and drilling company, means providing fast, safe and efficient concrete removal options for our customers, as well as offering floor grinding and surface preparation services. Speedy Concrete Cutting operates six Mack dump truck and Bobcat skid steer loader rigs throughout the state and has five diamond grinding units of varying sizes to tackle any of or customer’s needs, large or small.

GPR Scanning:  Speedy Concrete Cutting uses Hilti X-Scan System to locate rebar, post tension tendons, active metal and plastic conduits and other items imbedded in solid concrete up to 18” in depth. The Hilti scanning system is unique in that it utilizes three transmission and reception antenna rather than the single antenna present in most GPR systems. Speedy differentiates itself with this service by providing the GPR scanning and coring services in one mobile unit. Having one trained and skilled technician providing both services ensures quality control throughout the process. This is also the most time and cost efficient option for our customers.


What We Do

Products/Services Relating to Concrete Breaking, Sawing & Drilling
Products/Services Relating to Concrete Repair & Restoration Contrs.
Products/Services Relating to Demolition Contractors

Project Experience

Service Sector:
Public Private
Project Size:
From $500,000 to $2
Airport Runway
Civil & Site Development
School / College / University
Fire / Police Station
Gas Station
Hospital / Nursing Home
Hotel / Motel
Industrial Maintenance
City / Town Hall
Office Building
Terminal - Airport / Bus / Railroad
Retail Store
Road / Highway
Sewage / Water Treatment Plant
Theme Park
Parking Garage
Grocery Stores
Parking Lots
Swimming Pool
Tennis Court
Non-Residential Building
Court House
Fitness Center
Medical Office
Post Office

Service Areas

Preferred Brands & Manufacturers

Diamond Products
Diamond Products

Associations & Memberships

Member of AGC (Associated General Contractors) AGC (Associated General Contractors)
Member of Associated Builders and Contractors ABC ABC
Member of CASF (Construction Assn. of South Florida) CASF (Construction Assn. of South Florida)
Member of CSDA (Concrete Sawing & Drilling Assn.) CSDA (Concrete Sawing & Drilling Assn.)
Member of The Construction Underground The Construction Underground
Stay Connected: