Lake Roofing Systems

We offer premium roofing products installed by experienced roofing professionals. Ranging from architectural asphalt shingles to the most energy-efficient roofing products on the market today like stone coated steeland vertical panel metal roof systems. We promise to protect your home or building from the elements during the entire construction phase and to deliver nothing less than a quality installation that you as our customer will be proud of.

Flat Roofing Systems made by GAF, Mulehide and Johns Manville.

Modified Bitumen Torch down, GAF Modified Bitumen Adhesive Systems

TPO mechanically fastened & Heat welded, and fully adhered.

EPDM mechanically fastened & Heat welded, and fully adhered.

We are approved installers for all asphalt shingle products.

We have been installing this product since 1999. For New Construction Stone Coated Steel can be installed directly to a plywood deck or metal deck. The best choice of underlayment varies as to specific region and/or environment. Ideally a high temperature Peel and stick membrane is most efficient. In most cases the roofing system can be installed with or without a batten system. Metal reflects heat naturally and when coupled with a horizontal and or gridded batten system will provide for excellent air insulation and also let the roof breathe which in return produces energy savings for the owner and extends the life of the roof.

VERTICAL PANEL METAL ROOFING SYSTEMS: also known as standing seam metal roofing, vertical seam panels, are designed for agricultural roofing, residential roofing, and commercial roofing applications. Whether it is steel panels, aluminum panels, copper panels, or zinc panels that you’re searching for there is an abundance of metal roofing manufacturers to choose from throughout the United States. Most of which offer a similar variety of GREEN roofing products that are not harmful to the environment and when installed properly provide long-term roofing solutions and lower energy bills. Keeping in mind that all metal reflects heat naturally and even more so with special resin-based paint coatings such as Kynar 500. Vertical metal panels also come in different gauges of thickness made appropriate per application and panel profile, of which there are many.  You don’t have to be a contractor, architect, and/or engineer to make the right decision when choosing which vertical panel system is right for you. However, basic product knowledge in addition to professional advice is recommended for a successful outcome.

Rib Roofing panels traditionally are manufactured 3 feet wide with a length that is determined by how long the vertical rafters or trusses are. This system should not be installed on a roof deck that has less than a 3/12 pitch. The vertically aligned raised ribs usually 3/4″ to 1 1/4″ high provide channels for water drainage usually an optional 9″ or 12” on center. The rib roof panels are attached to the deck with screws that are fastened in between the ribs and on top of all side overlaps. This panel can be installed on residential homes, agricultural, and commercial applications. The decision to re-roof over an existing roof should be made on-site with a professional. There are many benefits to going over an existing roof and at the same time many reasons to take them off. We do both frequently.

TPO or Thermoplastic Polyolefin roofing is a top notch single ply roof system. It can be fully adhered to a deck or mechanically fastened and of course heat weld on the seams. This is your ideal flat roofing material. 

Lake Roofing performs many re-roof projects every year and can accommodate all needs.

We can accommodate all needs of new construction projects whether commercial buildings or custom home builds. Please reach out to us to discuss your specific needs if not listed in the scope of work.